Durable Surface Finishes and Protection for Homeware and Sanitary Products

NTI Nanofilm combines decorative PVD finishes, wear-resistant coatings and easy-clean surface treatments to help faucets, shower fittings, cookware, appliances and flow-control components resist scratches, corrosion, heat, water marks and repeated cleaning while maintaining consistent color and appearance from qualification through production.

What Homeware and Sanitary Brands Need from Surface Finishing Today

Premium color ranges, mixed substrates, everyday wear and frequent cleaning are raising the performance expected from decorative and functional surfaces. Manufacturers need finishes that stay consistent, resist visible damage and can be qualified efficiently across complete product families.

Consistent Colors Across Product Families

Consistent Colors Across Product Families

Faucets, showers, accessories, cookware and appliance trims increasingly need coordinated metallic, gold and black finishes across different component materials, geometries and manufacturing locations.

Higher Scratch and Wear Resistance

Harder, wear-resistant surfaces help reduce visible scuffing and scratching on high-touch components, preserving premium appearance through handling, wiping and everyday use.

Greater Corrosion and Cleaning Durability

Sanitary and kitchen surfaces must withstand water, humidity, detergents, food acids, descaling agents and repeated cleaning without premature staining, tarnishing or finish degradation.

Faster Finish Qualification

Faster Finish Qualification

Broader color portfolios and shorter product cycles increase the need for efficient sampling, controlled color matching and defined validation criteria before production release.

Protect Finish Quality and Product Performance Where It Matters Most

NTI surface technologies address the performance requirements manufacturers commonly qualify on kitchen and sanitary components: color consistency, scratch resistance, corrosion and chemical durability, easier cleaning, and friction and wear at moving interfaces.

Color and Finish Consistency

Maintain Consistent Color, Gloss and Texture Across Components

NTI Finish™ uses application-matched PVD coating routes to reproduce approved metallic, gold and black finish targets across brass, stainless steel and selected plated substrates, helping brands reduce visual mismatch and maintain a coordinated product collection.

Scratch and Wear Resistance

Scratch and Wear Resistance

Improve Scratch Resistance on High-Touch Surfaces

NTI Protect™ adds hard, wear-resistant surface protection to handles, trims, cookware and other exposed components, helping reduce visible scuffing and preserve finish quality through repeated handling, wiping and cleaning.

Corrosion, Chemical and Heat Durability

Corrosion, Chemical and Heat Durability

Protect Surfaces Against Water, Cleaning Chemicals and Heat

Application-specific coating routes can improve resistance to moisture, corrosion, detergents, food acids, descaling agents and thermal exposure, helping manufacturers protect appearance and product life in demanding kitchen and bathroom environments.

Water Marks, Fingerprints and Easy Cleaning

Reduce Water Marks and Fingerprints for Easier Cleaning

Selected NTI Repel™ treatments provide hydrophobic or oleophobic surface behavior on qualified finishes, helping reduce visible water marks, fingerprints and oil residue while making routine cleaning easier.

Friction and Wear at Moving Interfaces

Reduce Friction and Wear in Ceramic Valve Interfaces

NTI TAC-ON® Protect provides a hard, low-friction surface for selected ceramic valve and flow-control components, helping reduce wear and support smoother movement and longer operating life under wet or low-lubrication conditions.

Coating Solutions for High-Use Homeware and Sanitary Components

From premium kitchen knives and cookware to faucets, shower fittings and ceramic valves, NTI combines decorative and functional coatings around the surface performance each component needs in use.

Premium Kitchen Knives

Premium Kitchen Knives

NTI STAR-TAC® Protect combines a hard ta-C surface with low friction and corrosion resistance to support smoother cutting, durable dark appearance and longer-lasting blade performance on selected stainless-steel kitchen knives.

Cookware Exteriors and Lids

Cookware Exteriors and Lids

NTI Finish™ and NTI Protect™ help cookware exteriors, lids, handles and visible stainless-steel surfaces retain color and finish quality through repeated heating, handling, abrasion and cleaning.

Frying Pans and Cooking Vessels

Frying Pans and Cooking Vessels

Application-specific NTI coating routes can improve scratch resistance, heat durability and appearance retention on selected pan exteriors, handles and non-food-contact surfaces exposed to repeated household use.

Appliance Doors, Handles and Control Trims

Appliance Doors, Handles and Control Trims

NTI Finish™, NTI Protect™ and selected NTI Repel™ treatments help appliance brands coordinate color while improving scratch resistance, fingerprint control and cleaning durability on visible exterior components.

Faucets and Mixers

Faucets and Mixers

NTI Finish™, NTI Protect™ and NTI Repel™ support metallic, gold and black faucet finishes with improved resistance to scratching, corrosion, cleaning chemicals, water marks and fingerprints.

Shower Heads and Shower Hardware

Shower Heads and Shower Hardware

NTI decorative and easy-clean surface solutions help shower heads, columns, handles and accessories maintain coordinated color while resisting water exposure, mineral residue, handling and routine cleaning.

Drainage Covers, Rails and Accessories

Drainage Covers, Rails and Accessories

NTI Finish™ and NTI Protect™ help stainless-steel drainage covers, rails, trim plates and bathroom accessories maintain brushed appearance while improving abrasion and corrosion resistance.

Ceramic Valve and Flow-Control Components

NTI TAC-ON® Protect can reduce friction and wear on selected ceramic valve and flow-control interfaces, supporting smoother movement and longer operating life through repeated wet or low-lubrication cycles.

Premium Consumer Hardware

Premium Consumer Hardware

NTI Finish™, NTI Protect™ and NTI Repel™ help coordinate color, improve wear resistance and simplify surface maintenance across selected handles, knobs, brackets and premium home or bathroom hardware.

Flexible Routes from Coating Development to Production

Start with coating service for qualification and coated-part supply, integrate NTI equipment for greater in-house process control, or co-develop a new coating route for application-specific materials, geometries and performance requirements.

Coating Service

Coating Service

Qualify a new coating or finish with NTI, then source coated parts through established production operations. This route supports manufacturers that want application engineering and dependable coated-part supply without installing an internal coating line.

In-House Coating Equipment

In-House Coating Equipment

Bring approved coating processes in-house with NTI Dream™ Batch or NTI Titan™ Inline when tighter process ownership, capacity control and manufacturing integration are required. Equipment configuration is matched to coating technology, component format, product mix and output target.

Development Partnership

Development Partnership

Co-develop the coating stack, surface preparation, fixturing and validation plan when a new substrate, geometry or performance target falls outside an established process. This route supports application-specific development through production qualification.

Explore More

Explore adjacent industries where durable finishes, wear protection and surface performance are also critical to product quality and customer experience.

Luxury Goods

Decorative PVD finishes and durable surface protection for watches, eyewear, jewellery, bag hardware and premium components.

Consumer Electronics

Decorative and functional coatings for smartphones, wearables, moving interfaces, electrical surfaces and optical components.

Industrial Applications

Wear, friction, corrosion and contamination control for production components, supported by coating services and equipment.

Improve Finish Durability on Your Next Product

Share the component, substrate, target color or finish, use environment and qualification requirements. NTI can recommend the most suitable coating, coating service, equipment or development route for your application.

Frequently Asked Questions

What surface solutions does NTI Nanofilm provide for homeware and sanitary products?

NTI Nanofilm provides decorative PVD finishes, wear-resistant protective coatings and easy-clean surface treatments for homeware and sanitary components. Relevant portfolios include NTI Finish™, NTI Protect™ and NTI Repel™, supported by coating services, application development and NTI coating equipment.

Applications include premium kitchen knives, cookware exteriors and lids, appliance doors and trims, faucets and mixers, shower heads and hardware, drainage covers and accessories, selected ceramic valve interfaces, and other premium consumer hardware. Final suitability depends on the substrate, geometry, finish target and qualification requirement.

Yes. NTI can develop a surface around both appearance and performance requirements, including metallic, gold or black finish targets together with scratch, wear, corrosion, chemical or easy-clean performance. The coating route is matched to the substrate, geometry and intended use environment.

Yes. NTI Finish™ supports metallic, gold and black finish directions for selected faucets, shower hardware and premium components. Development can be matched to an approved color or reference sample, gloss level, texture, substrate condition and durability requirement.

Selected NTI Repel™ treatments can improve hydrophobic or oleophobic surface behavior, helping reduce visible water marks, fingerprints and oil residue on qualified finishes. This can make routine cleaning easier while supporting the intended decorative appearance.

Validation is matched to the actual component and customer acceptance criteria. Depending on the application, testing may include color and appearance assessment together with relevant adhesion, abrasion, corrosion, chemical, thermal, water exposure or cleaning-cycle methods.

Yes. NTI TAC-ON® Protect provides a hard, low-friction surface for selected ceramic valve and flow-control interfaces, helping reduce wear and support smoother movement and longer operating life under wet or low-lubrication conditions.

NTI can review stainless steel, selected steels, brass, aluminum, ceramics and other metallic or prefinished substrates. Compatibility depends on surface preparation, coating temperature, existing plated layers, geometry, finish target and validation requirements.

Yes. Customers can use NTI coating services for application qualification and coated-part supply, or consider NTI Dream™ Batch and NTI Titan™ Inline equipment when greater in-house process ownership and manufacturing integration are required.

Useful information includes the component, substrate, current surface condition, target color or finish, geometry, expected water, heat, chemical or cleaning exposure, current failure mode, qualification method, anticipated production volume and preferred production route.

Premium Kitchen Knives

NTI STAR-TAC® Protect combines a hard ta-C surface with low friction and corrosion resistance to support smoother cutting, durable dark appearance and longer-lasting blade performance on selected stainless-steel kitchen knives.

Premium Kitchen Knives

Recommended Solution / Route

  • NTI STAR-TAC® Protect
  • Coating Service or Coating Equipment

Key Qualification Requirements

  • Blade steel grade and heat-treatment condition
  • Forged or stamped blade geometry
  • Coated area, edge preparation and masking
  • Cutting, cleaning and corrosion acceptance methods

Cookware Exteriors and Lids

NTI Finish™ and NTI Protect™ help cookware exteriors, lids, handles and visible stainless-steel surfaces retain color and finish quality through repeated heating, handling, abrasion and cleaning.

Cookware Exteriors and Lids

Recommended Solution / Route

NTI Finish™ + selected NTI Protect™ requirements

Key Qualification Requirements

  • Substrate grade and surface preparation
  • Maximum service temperature and thermal cycling
  • Dishwasher, detergent and abrasion methods
  • Approved color, gloss and texture reference

Appliance Doors, Handles and Control Trims

NTI Finish™, NTI Protect™ and selected NTI Repel™ treatments help appliance brands coordinate color while improving scratch resistance, fingerprint control and cleaning durability on visible exterior components.

Appliance Doors, Handles and Control Trims

Recommended Solution / Route

NTI Finish™ + NTI Protect™ or NTI Repel™

Key Qualification Requirements

  • Base metal or existing plated layer
  • Heat and cleaning-chemical exposure
  • Fingerprint and abrasion targets
  • Color matching across adjacent components

Faucets and Mixers

NTI Finish™, NTI Protect™ and NTI Repel™ support metallic, gold and black faucet finishes with improved resistance to scratching, corrosion, cleaning chemicals, water marks and fingerprints.

Faucets and Mixers

Recommended Solution / Route

NTI Finish™ + NTI Protect™ + selected NTI Repel™ requirements

Key Qualification Requirements

  • Brass, stainless steel or plated base condition
  • Complex geometry and recessed areas
  • Corrosion, chemical and abrasion methods
  • Approved color, gloss and texture reference

Shower Heads and Shower Hardware

NTI decorative and easy-clean surface solutions help shower heads, columns, handles and accessories maintain coordinated color while resisting water exposure, mineral residue, handling and routine cleaning.

Shower Heads and Shower Hardware

Recommended Solution / Route

NTI Finish™ + selected NTI Repel™ requirements

Key Qualification Requirements

  • Water quality and mineral-deposit exposure
  • Shower-cleaner and descaling chemicals
  • Curved geometry, holes and masking
  • Color matching across mixed component sizes

Drainage Covers, Rails and Accessories

NTI Finish™ and NTI Protect™ help stainless-steel drainage covers, rails, trim plates and bathroom accessories maintain brushed appearance while improving abrasion and corrosion resistance.

Drainage Covers, Rails and Accessories

Recommended Solution / Route

NTI Finish™ + selected NTI Protect™ requirements

Key Qualification Requirements

  • Stainless steel grade and fabrication marks
  • Weld, edge and formed-area coverage
  • Cleaning, corrosion and abrasion methods
  • Matched brushed direction and texture

Ceramic Valve and Flow-Control Components

NTI TAC-ON® Protect can reduce friction and wear on selected ceramic valve and flow-control interfaces, supporting smoother movement and longer operating life through repeated wet or low-lubrication cycles.

Recommended Solution / Route

  • NTI TAC-ON® Protect
  • Coating Service or Development Partnership

Key Qualification Requirements

  • Ceramic composition and surface finish
  • Contact load, movement and lubrication
  • Water chemistry and particle sensitivity
  • Coating thickness and dimensional tolerance

Premium Consumer Hardware

NTI Finish™, NTI Protect™ and NTI Repel™ help coordinate color, improve wear resistance and simplify surface maintenance across selected handles, knobs, brackets and premium home or bathroom hardware.

Premium Consumer Hardware

Recommended Solution / Route

NTI Finish™ + NTI Protect™ or NTI Repel™

Key Qualification Requirements

  • Material mix across the product family
  • High-touch wear and fingerprint exposure
  • Color consistency across suppliers
  • Product mix, expected volume and changeover needs